H08DOP

H08DOP

SeriesDigital Module
DI/DO points8DO, Transistor PNP output
COM PortN/A
Remote I/O moduleN/A
The 8 DO(transistor outputs) can be used as the extension module for any types of PLC host; When a extension module hanging at the back of thehost through the parallel bus, it can be powered by the inner 24VDC on the host.
  • Product Introduction
  • Technical Specification
  • File Download
ModelPowerDIDOCommunicationDimension
H08DOP24V DC
8 Transistor PNPN/A30*95*82mm

Terminal wiring diagram

H08DOP.jpg

Product DO specification


Item Relay Output-RNPN or PNP transistor output - T/P
maximum
 load
Resistance load2A/1 point,8A/4 point per COM0.5A/1 point,2A/4 point per COM
Inductive load50VA5W/24VDC
Light load100W12W/24VDC
Min. load10mA2mA
Voltage specificationBelow 250VAC,30VDC30VDC
Drive capabilityMaximum 5A/250VACMAX 1A 10S
Response timeOff-on 10ms,On-off 5msOff→On 10μs, On→Off 120μs
Leakage current when 
route opened
---Below 0.1mA
Isolation modeMechanical isolationEach Channel optical isolation
Output indicationLED light means ON , dark means OFF
Power supplyPLC internal power supply 24VDC

Digital Output (DO) wiring diagram

DC PNP Transistor output.png


No CR data