H08XDR

H08XDR

SeriesDigital Module
DI/DO points4DI/4DO, Relay output
COM PortN/A
Remote I/O moduleN/A
4 DI, 4 DO(relay outputs), can be used as the extension module for any types of PLC host; When a extension module hanging at the back of thehost through the parallel bus, it can be powered by the inner 24VDC on the host.
  • Product Introduction
  • Technical Specification
  • File Download
ModelPowerDIDOCommunicationDimension
H08XDR24V DC44 RelayN/A30*95*82mm

Terminal wiring diagram

Haiwell Industry Automation


Product DI specification

ItemDigital Input DI
Input signalNon-voltage contact or NPN/PNP contact
Action drivingON: 3.5 mA above OFF: below 1.5 mA
Input impedanceAbout 4.3KΩ
Input maximum current10mA
Response timeDefault 6.4ms,Configurable 0.8~51.2ms
Isolation modeEach Channel optical isolation
Input indicationLED light means ON, dark means OFF
Power supplyPLC internal power supply: DC power(sink or source)5.3mA@24VDC

Digital input (DI) wiring diagram

Haiwell Industry Automation


Product DO specification

Item Relay Output-RNPN or PNP transistor output - T/P
maximum
 load
Resistance load2A/1 point,8A/4 point per COM0.5A/1 point,2A/4 point per COM
Inductive load50VA5W/24VDC
Light load100W12W/24VDC
Min. load10mA2mA
Voltage specificationBelow 250VAC,30VDC30VDC
Drive capabilityMaximum 5A/250VACMAX 1A 10S
Response timeOff-on 10ms,On-off 5msOff→On 10μs, On→Off 120μs
Leakage current when 
route opened
---Below 0.1mA
Isolation modeMechanical isolationEach Channel optical isolation
Output indicationLED light means ON , dark means OFF
Power supplyPLC internal power supply 24VDC

Digital Output (DO) wiring diagram

Haiwell Industry Automation

No CR data