- Back |
- Home page
- / About Us
- / Haiwell News
- / Haiwell PLC－Specification of C/T/H/N series
Performance Specification
| Item | Specification | Declare | |
| Execution speed | 0.05μs/basic instruction | ||
| Program language | LD(ladder) + FBD(function block) + IL( instruction list) | Accord with IEC 61131-3 | |
| Program capacity | 48K | ||
| Storage Method | Flash ROM permanent storage, dispense with backup battery | ||
| X | External input | X0~X1023 | Support edge catch and signal filtering set |
| Y | External output | Y0~Y1023 | Power-off preserve output can be configured |
| M | Auxiliary relay | M0~ M12287 | Power-off preserve area can be set freedom |
| (default power-off preserve) M1536~M2047 | |||
| T | Timer (output coil) | T0~T1023 | Power-off preserve area can be set freedom, time base: 10ms, 100ms, 1s be set freedom,T252~T255 1ms |
| (default power-off preserve) T96~T127 | |||
| C | Counter (output coil) | C0~C255 | Power-off preserve area can be set freedom |
| (default power-off preserve) C64~C127 | |||
| S | Step state bits | S0~S2047 | Power-off preserve area can be set Freedom |
| (default power-off preserve) S156~S255 | |||
| SM | System state bits | SM0~SM215 | |
| LM | Local relay | LM~LM31 | |
| AI | Analog input register | AI0~AI255 | Support quantities convert, sample times and zero point correct |
| AQ | Analog output register | AQ0~AQ255 | Support quantities convert, power-off preserve output can be configured |
| V | Internal data register | V0~V14847 | power-off preserve area can be set freedom |
| (default power-off preserve) V1000~V2047 | |||
| TV | Timer (Current value register) | TV0~TV1023 | Power-off preserve area can be set freedom, time base: 10ms, 100ms, 1s can be set freedom, T252~T255 1ms |
| (default power-off preserve) TV96~TV127 | |||
| CV | Counter (Current value register) | CV0~CV255 | Power-off preserve area can be set freedom, CV48~CV79 are 32 bits, Other are 16 bits |
| (default power-off preserve) CV64~CV127 | |||
| SV | System register | SV0~SV900 | |
| Lv | Local Register | Lv0~Lv31 | |
| P | Indexed addressing point | P0~P9, use for indirect addressing | |
| I | Interrupt | I1-I52 | |
| LBL | Lable | 255, use for program skip | |
| Communication port | MPU built-in 2 communication port (RS232/RS485), Max 5 communication port (RS232/RS485) Extension | Can be used for programing or networking (master/slave) | |
| Communication protocol | Modbus RTU/ASCII protocol, freedom communication protocol, Haiwellbus speed communication protocol, Baud rate 1200~115200bps | ||
| PLC network capacity | PLC communication address can be set external set, Max 254, support 1: N, N: 1, N: N network | ||
| Real time clock (RTC) | Display: year /month /day /hour /minute /second /week | Built-in battery | |
| Float point arithmetic instruction | Support within 32 bits float point arithmetic, integer/float point convert arithmetic | ||
| Password protect | Support 3 level password protection: Program file password Program block password PLC hardware password and upload prohibited function | ||
Power specification
| Item | AC Supply | DC Supply | |
| Input power supply | AC100~240V | DC24V -15%~+20% | |
| Power supply frequency | 50~60Hz | --- | |
| Instant surge | MAX 20A 1.5ms @220VAC | MAX 20A 1.5ms @24VDC | |
| Power output | MAX 25VA | --- | |
| Permit Power supply lost | 20ms within @220VAC | 10ms within | |
| Fuse capacity | 2A,250V | 2A,250V | |
| Action (working) specification | When input power voltage rise to 95~100VAC, PLC will be run, when input power voltage drop down to 70VAC, PLC will be stopped. | --- | |
| Output power supply | 5VDC for CPU | 5V,-2%~+2%,1.2A(maximum) | 5V,-2%~+2%,1.2A(maximum) |
| 24VDC power supply for output and Extension modules | 24V,-15%~+15%,500 mA(maximum) | 24V,-15%~+15%,500mA (maximum) | |
| 24VDC power supply for input and external device | 24V,-15%~+15%,200mA(maximum) | Direct use the 24VDC input power supply | |
| Isolation model | Transformer/photo electricity isolation,1500VAC/1 minute | No electrical isolation | |
| Protect the power supply | DC24V output over the limit of the current | DC power input polar against, over voltage | |
Product environment specification
| Item | Environment Specification |
| Temperature/Humidity | Working temperature: 0 ~ + 55 ℃ storage temperature: - 25 ~ + 70 ℃ and humidity: 5 ~ 95% RH, no condensation |
| Anti vibration | 10~57Hz range 0.075mm,57Hz~150Hz acceleration 1G,X, Y, Z three axis 10 times each direction |
| Anti shock | 15G,contiune 11ms,X, Y, Z three axis 6 times each direction |
| Anti jamming | AC EFT: ± 2500V, surge: ± 2500V, DC EFT: ±2500V, surge: ±1000V |
| Over voltage capability | Between AC terminal and PE terminal 1500VAC,1min,Between DC terminal and PE terminal 500VAC,1min |
| Insulation impedance | Between AC terminal and PE terminal@500VDC,>=5MΩ(Between all input/output terminal and PE terminal@500VDC) |
| Earth | The third grounding(Cannot connect to the strong power system’s earth) |
| Operation environment | Operated where no dust, moisture, corrosion, electrical shock and physical shock ,etc. |
APP
© 2005 Xiamen Haiwell Technology Co., Ltd. All Rights Reserved.
Headquarters: 13-14/F, C03 Building, Phase III Software Park, JiMei District, Xiamen, Fujian China; Manufacturing Center: No. 336-2 Anbian South Road, Torch High tech Zone (Xiang'an) Industrial Zone, Xiang'an District, Xiamen，Fujian China.