- Back |
- Home page
- / About Us
- / Haiwell News
- / Haiwell PLC－Switch input and output specifications and wiring
Digital input （DI）specification
| Item | Digital Input DI |
| Input signal | Non-voltage contact or NPN/PNP contact |
| Action driving | ON: 3.5 mA above OFF: below 1.5 mA |
| Input impedance | About 4.3KΩ |
| Input maximum current | 10mA |
| Response time | Default 6.4ms,Configurable 0.8~51.2ms |
| Isolation mode | Each Channel optical isolation |
| Input indication | LED light means ON, dark means OFF |
| Power supply | PLC internal power supply: DC power(sink or source)5.3mA@24VDC |
Digital output （DO）specification
| Item | Relay Output-R | Transistor Output NPN-T | |
| maximum load | Resistance load | 2A/1 point,8A/4 point per COM | 0.5A/1 point,2A/4 point per COM |
| Inductive load | 50VA | 5W/DC24V | |
| Light load | 100W | 12W/DC24V | |
| Min. load | 10mA | 2mA | |
| Voltage specification | Below 250VAC,30VDC | 30VDC | |
| Drive capability | Maximum 5A/250VAC | MAX 1A 10S | |
| Response time | Off-on 10ms,On-off 5ms | Off→On 10us, On→Off 120us | |
| Leakage current when route opened | --- | Below 0.1mA | |
| Isolation mode | Mechanical isolation | Each Channel optical isolation | |
| Output indication | LED light means ON , dark means OFF | ||
| Power supply | PLC internal power supply 24VDC | ||
Digital Input (DI) wiring diagram
Digital output (DO) wiring diagram
APP
© 2005 Xiamen Haiwell Technology Co., Ltd. All Rights Reserved.
Headquarters: 13-14/F, C03 Building, Phase III Software Park, JiMei District, Xiamen, Fujian China; Manufacturing Center: No. 336-2 Anbian South Road, Torch High tech Zone (Xiang'an) Industrial Zone, Xiang'an District, Xiamen，Fujian China.