In order to protect the PLC internal circuit, all the indicators will go out at this time(including power indicators). Short-circuit for a long time may burn out the host PLC, please be careful not to
The reason is that the "hardware configuration in the software " are not the same as the actual configuration ,if you want to download, part of the program function may be abnormal.Error ind
All the series PLC of Haiwell have been certified by the CE certification, and there are a lot of applications in the welding equipment.
You can click the menu bar【file/ program project properties】then open the program, select the host you want to modify and click ok on the project properties dialog box.
Relay is mechanical contact, lifetime limitation is about 100000 times. But with strong overload capability, it supports AC and DC load, maximum 2A current for each contact.Transistor has no lif
The analog output has voltage output and current output, the external wirings of the two types are different; If the current output was used in the beginning, and now it is changed to voltage output,
It supports linear interpolation/ ARC interpolation / synchronism pulse output / absolute address / relative address / backlash compensation / electric original point redefine etc.
Default 2 communication ports, 1 RS232 (COM1) and 1 RS485 (COM2, byterminal “A+ B-“). Excluding the default 2 communication ports, C seriesdoesn’t support any more expansion. And T/H/N series can expa
